Cooling tower fill in cooling tower water temperature can reduce the tower, but the use of this kind of cooling tower fill time is limited, so know the use time of packing and what factors have a relationship? What should I pay attention to in daily operation? The main factors that affect the service life of the fil...
The S wave filler is the “S” wave cooling tower filler, which is the material filled in the cooling tower, which can be understood as the filling agent and the increment agent, so what is the design principle of the S wave cooling tower filler? The reasonable design principle of trapezoidal oblique wave ...
Is there any acceptance criteria for the liangchi Cooling Tower Fill? Is the cooling effect of the packing related to the appearance of the fill? What is the acceptance standard for the good opportunity? If the bump is not obvious, is it not a qualified product? The shape of the packing and the quality of the mate...
In order to guarantee normal cooling, cooling tower can be used for a long time, after aging phenomenon in a cooling tower Pvc fills, can cause local cooling tower fill fall off phenomenon, cause the efficiency of the cooling tower heat loss, into a vicious cycle. In this case, the packing will be very easy to break...
S Wave Filler is installed in the cooling tower, water and space have a good contact, with hot, qualitative change in the surface of the filling material, the packing sheet is apart from the big, unit volume, light weight, can prevent pollutants blocked. The water vapor contact area is large, the process is long, th...
What needs to be noticed in the replacement of Cooling Tower PVC Filler? Both in the replacement of Cooling Tower PVC Filler or S waves or industrial tower filler and so on is not type of fill, cooling tower pvc filler role is to provide full of gas and liquid two phase interface, and to improve the degree of turbul...
Material requirements for the liangchi filling material of the cooling tower: 1. Liangchi cooling tower filler appearance and dimensions of the moulded sheet shall meet the relevant requirements in the technical conditions of the cooling tower plastic parts (DL/T 742-2001). 2. Liangchi cooling tower filler forming ...
The filling of the cooling tower will have more sediments after long use, and these sediments include lichen and algae that are easy to grow in damp and dark environments. And if you use the earth with a lot of weather, the yellow sand soil will also be brought to the cooling tower fill, and some of the sediment in ...
The square – flow cooling tower fill should firstly be used to see its material, and the recycled packing material is poor. The raw material may be used repeatedly, so the sheet material is thicker to mold the packing. Most of the original square – flow cooling tower fill adopts the absorption molding, t...
PP Pall ring, is developed on the basis of the raschig ring, it is in the raschig ring wall along the circumferential rushed a layer or two layers of rectangle holes, but the holes of the parent metal is not out of the circle, but bend inward toward the center of the ring, this structure enhanced ring the inner surf...
Suspended Ball Padding Filter Media for Wastewater Treatment is a kind of suspended padding material with no rest mud, which is the latest product developed on the basic of many wastewater treatment padding materials. It mainly used as the carrier of bio film and intercept for the suspending materials in water. Sus...
The biofilm method of MBBR Media wastewater is both ancient and developing. So far, there have been many kinds of biological membrane method in use, such as aerobic biological filter, biological rotating disc, submerged biological filter, particle medium biofilm, fluidized bed, such as suspended carrier biofilm proc...