OF21MA Offset-Fluted Cooling Tower Fill

Material:PVC/PP
Sheet width: 600mm
Sheet Length: Customized

Details

OF21MA Offset-Fluted Cooling Tower Fill

Quick view :

1. Size: 1500*600mm.Or can be customized.
2. Thickness:0.2~0.4mm
3.Sheet space: 20mm
4. Applicable Temperature:65°C~-35°C
5. Color: White, black, etc
6. Shaping mode: Compression molding

Cooling tower fill is one of the most important components for exchange of gas and water in cooling tower. The heat and resistance characteristic of the cooling tower fill are the main factors influencing the cooling efficiency. Moreover the quality of the material will influence the fill’s lifetime. SINTA choose the high quality fill material for the cooling tower, with the advantages of good chemical stability, resistant acid, alkali and organic solvent corrosion, high cooling efficiency, small ventilation resistance, strong hydrophilicity, large contact area etc.

OF21MA Offset-Fluted Film Fill Media characteristic:

This kind of cooling tower film fill with the advanced technical, long lifetime, low resistance, light weight. During the service, the fill can increase the water flow process. It is widely used in Square cooling tower.

1) Application: put into the square cooling tower

2) Characters:

acidproof, alkali-resisting, anticorrosion for the organic solvent

good performance of inflaming retarding

oxygen index≥31

3) Description:

Normal Size:600mmX1000mm

OR

Width: Meet your demand

Length: Meet your requirement.

Thickness: Meet your demand

4) Working temperature: PVC: -20°C~70°C

OF21MA Offset-Fluted Film Fill Media have the advantage as below:

1. Anti-aging

2.Excellent Performance

3.Long Service life

4.Good heat exchange perfomance, and excellent Cooling efficiency

5.Easy to install

Cooling tower fill media is the most important part of the cooling tower, its efficiency high and low which  depends on the cooling water and air in the packing of the extent of the full access.

Item nameYuanheng cooling tower fill
TypeCooling tower parts
MaterialPVC
Unitpc(sheet)
ApplicationFor industrial cooling tower
PVC fill size1500*600mm, or as your requested.
Sheet space20mm
Sheet thickness0.20-0.40mm
Operating temperature60 degree C-35 degreeC
ColorBlack,grey,etc.
CraftPlastic extrusion mould and  blister forming
BrandSINTA
Place of originHebei,China
MOQ1000pcs
Packing detailsIn bundle,wooden pallet or as your requests.
Supply ability50000 pieces/month
Leadtime5-7 days for sample,15-20 days for bulks.
Payment termsT/T